Construction Trades Technology (CTT)

Community and Technical College
Construction Management Program
907-455-2846

CTT F100      Construction Technology Core
3 Credits

Offered As Demand Warrants

Basic construction techniques using OSHA approved standards by stressing how to follow safe work practices and procedures, how to safely use hand and power tools, how to extract information from construction blueprints and drawings, good housekeeping habits, and material handling on the construction site.

Lecture + Lab + Other: 2.5 + 1.5 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 6 credits

CTT F101      Basic Construction Safety
1 Credit

Offered As Demand Warrants

Introduction to basic construction safety using OSHA approved standards. Focus is on safe work practices and procedures, the proper inspection of safety equipment before use and the proper use of safety equipment. (Alternative to CTT F100 when taken with CTT F102; CTT F103; CTT F104.)

Lecture + Lab + Other: 1 + 0.5 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F102      Introduction to Hand and Power Tools
1 Credit

Offered As Demand Warrants

Introduction to basic hand and power tools used in construction and maintenance and the importance of their care and use. Valuable safety information for each type of tool is discussed. Understanding proper usage helps trainees to prevent accidents. Some specialty tools used by different crafts are also introduced.

Prerequisites: CTT F101.

Special Notes: Alternative to CTT F100 when taken with CTT F101; CTT F103; CTT F104.

Lecture + Lab + Other: 0.5 + 1 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F103      Introduction to Blueprint Reading
1 Credit

Offered As Demand Warrants

Introduction to basic blueprint terms, components and symbols. Different types of construction drawings commonly used on job sites and why each type of drawing is important will be presented. Standardized information contained on blueprints such as identification, revision status, symbols, project titles, dimension and scale will be covered.

Prerequisites: CTT F102.

Special Notes: Alternative to CTT F100 when taken with CTT F101; CTT F103; CTT F104.

Lecture + Lab + Other: 1 + 1 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F104      Basic Communication and Employability Skills
2 Credits

Offered As Demand Warrants

Techniques for communicating effectively with co-workers and supervisors. Includes critical thinking and problem-solving skills and reviews effective relationship skills, effective presentation and key workforce issues such as sexual harassment, stress and substance abuse. (Alternative to CTT F100 when taken with CTT F101; CTT F102; CTT F103.)

Prerequisites: CTT F103.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F106      Construction Measuring
3 Credits

Offered As Demand Warrants

Introduction to basic mathematical procedures commonly used in the construction and maintenance crafts. Includes multiplication, subtraction, addition, division, working with fractions and measuring areas, volume and capacity of shapes.

Lecture + Lab + Other: 3 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F110      Residential Carpentry I
8.5 Credits

Offered As Demand Warrants

Introduction to basic materials and framing techniques used in the construction trades. Includes an orientation, introduction to materials and advanced tools used in the trades. Includes techniques used in framing a structure and to exterior doors and windows commonly installed on construction projects and their proper installation.

Prerequisites: CTT F100.

Special Notes: Alternative to CTT F111; CTT F112; CTT F113; CTT F114.

Lecture + Lab + Other: 5 + 7 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F111      Materials and Tools Used in the Trade
2.5 Credits

Offered As Demand Warrants

Examines the sources and uses of various softwoods and hardwoods, the grading system for lumber and plywood, composition and uses of various engineered sheet materials and laminated lumber products and the many kinds of fasteners and adhesives used with wood and masonry construction.

Prerequisites: CTT F100.

Special Notes: Alternative to CTT 110 when taken with CTT F111; CTT F112; CTT F113; CTT F114.

Lecture + Lab + Other: 2 + 1 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F112      Floor Systems, Wall and Ceiling Framing
2 Credits

Offered As Demand Warrants

Focuses on framing basics. Includes the procedures for laying out and constructing a wood floor using common lumber as well as engineered building materials, laying out and framing walls and ceilings, roughing in doors and window openings, construction corners and partition Ts, bracing walls and ceilings, and applying sheathing.

Prerequisites: CTT F111.

Special Notes: Alternative to CTT F110 when taken with CTT F111; CTT F112; CTT F113; CTT F114.

Lecture + Lab + Other: 1 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F113      Roof Framing, Windows and Exterior Doors
2 Credits

Offered As Demand Warrants

Describes the various kinds of roofs and instructions for laying out rafters for gable roof, hip roof and valley intersections. Includes both stick built and truss built roofs, various types of windows, skylights, exterior doors and instructions for installing weather stripping and lock sets.

Prerequisites: CTT F112.

Special Notes: Alternative to CTT F110 when taken with CTT F111; CTT F112; CTT F113; CTT F114.

Lecture + Lab + Other: 1 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F114      Introduction to Concrete Materials and Forms
2 Credits

Offered As Demand Warrants

Introduction to various cements and other materials which when mixed form various types of concrete. Includes concrete volume estimates, concrete tests, concrete curing methods, reinforcement materials such as rebar, bar supports and welded-wire fabric and tasks in the construction of foundations and flat work.

Prerequisites: CTT F113.

Special Notes: Alternative to CTT F110 when taken with CTT F111; CTT F112; CTT F113; CTT F114.

Lecture + Lab + Other: 1 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F115      Residential Carpentry--Level II
12 Credits

Offered As Demand Warrants

This course builds upon the skills learned in CTT F110. Includes methods and techniques used to locate structures and install exterior siding and related element protection. Various types of roofing and installation of those materials, types and methods of drywall and its installation and interior finish applications.

Prerequisites: CTT F110.

Special Notes: Alternative: CTT F116; CTT F117; CTT F118.

Lecture + Lab + Other: 6 + 12 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F116      Reading Plans and Site Layout--Level I
2 Credits

Offered As Demand Warrants

This course builds upon CTT F110. Introduces the principles, equipment and methods used to perform site layout tasks of distance measurements, differential leveling and the site layout responsibilities of individuals on the site. (Alternative to CTT F115 when taken with CTT F117; CTT F118; CTT F119.)

Prerequisites: CTT F110.

Lecture + Lab + Other: 1 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F117      Exterior Finish and Moisture Protection
2 Credits

Offered As Demand Warrants

Introduction to materials and installation techniques used in various types of siding. Includes the installation procedures and basic requirements for insulation, moisture control and ventilation. (Alternative to CTT F115 when taken with CTT F116; CTT F118; CTT F119.)

Prerequisites: CTT F116.

Lecture + Lab + Other: 1 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F118      Roofing, Stairs and Metal Studs Applications
3 Credits

Offered As Demand Warrants

Introduction to materials and installation techniques for a number of basic types of roofing. Includes installation techniques of stairs and metal studs. (Alternative to CTT F115 when taken with CTT F116; CTT F117; CTT F119.)

Prerequisites: CTT F117.

Lecture + Lab + Other: 2 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F119      Drywall and Interior Finish Applications
5 Credits

Offered As Demand Warrants

Introduction to materials, tools and procedures used to install and finish gypsum drywall on walls and ceilings and to correct drywall finishing problems. Includes installation of various types of doors and their related hardware in several types of walls, materials, tools, installation, trim, and maintain suspended ceilings.

Prerequisites: CTT F118.

Special Notes: Alternative to CTT F115 when taken with CTT F116; CTT F117; CTT F118.

Lecture + Lab + Other: 2 + 6 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F121      Train the Trainer
2 Credits

Offered As Demand Warrants

Journeypersons are needed to transfer their skills to younger workers and this program will provide the skilled person with an intense series of discussions related to teaching strategies, classroom management and leadership, group dynamics and evaluation of training. Program completers may qualify for adjunct status with UAF.

Prerequisites: Skilled journeyperson in specific skill area.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F130      Introduction to Facility Maintenance
1 Credit

Offered As Demand Warrants

Introduction to building systems and different types of building maintenance; deferred, preventative, emergency, proactive and reactive. Provides students with basic safety instruction of hand and power tools and chemicals used in the facility maintenance occupation in accordance with Federal OSHA regulations. Instruction in Personal Protective Equipment (PPE) requirements.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 2 credits

CTT F131      Interior Repairs
1 Credit

Offered As Demand Warrants

Provides students with basic skills needed to install and repair drywall. Students will learn how to identify components of drywall assembly and identify tools and fasteners needed to install drywall. Students will identify different materials and proper tools needed in drywall finishing.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 2 credits

CTT F132      Flooring Installation
1 Credit

Offered As Demand Warrants

Introduces students to concepts and practical applications of floor coverings. Students will learn how to install underlayment, floor coverings and trim. Introduction to special tools necessary for safely and correctly installing flooring.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 2 credits

CTT F133      Cabinet Installation with Countertops
1 Credit

Offered As Demand Warrants

Provides students with basic concepts of installing cabinets with countertops. Identify various types of cabinet construction (stock/semi-custom/custom-built). Introduction to different types of wood products and special tools. Instruction in and practical application of different techniques of installing base cabinets and top or wall cabinets.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F134      Garbage Disposal Installation
1 Credit

Offered As Demand Warrants

Inform students of the basic knowledge of installing a garbage disposal unit in a basic kitchen cabinet. Students will learn how to use special tools in connecting drain and waste piping and venting systems from a house unit. Students will review safety issues related to the installation process.

Lecture + Lab + Other: 0.5 + 1 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 2 credits

CTT F135      Boiler Troubleshooting and Burner Repair
2 Credits

Offered As Demand Warrants

Focuses on the basic components of boilers and burners used for heating residential and commercial properties. Key concepts and strategies related to the process and safety operations of combustion, boiler thermodynamics, control systems, fuel pumps, ignition systems, draft, venting principles and boiler operation according to hydronic principals and Alaska code.

Lecture + Lab + Other: 0 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 2 credits

CTT F136      Landscaping and Horticulture
2 Credits

Offered As Demand Warrants

Introduces students to the process/procedure of preparing and landscaping a grounded area. Students will be introduced to concepts of placement of appropriate plants and vegetation, maintenance of edged and mowed lawn area, weed and fertilization control and watering schedules.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 4 credits

CTT F137      Appliance Troubleshooting and Repair
2 Credits

Offered As Demand Warrants

Provides students with conceptual and practical applications in troubleshooting and repairing appliances. Students will be instructed in diagnostic skills that support repairing and replacing components in various equipment such as refrigerators, washing machines, dishwashers, clothes dryer and oven and cook-tops.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 4 credits

CTT F138      Residential Heating Controls
2 Credits

Offered As Demand Warrants

Provides conceptual and practical applications for students wishing to become a residential heating control technician. Topics will explore diagnosis of equipment problems in operation, testing and adjusting conventional and electronic thermostats. Students will receive instruction on the operation of common electrical and electronic circuits used to control residential heating systems.

Recommended: Instructor approval if student has not taken CTT courses.

Lecture + Lab + Other: 0 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 2 times for up to 4 credits

CTT F141      Door and Window Installation
1 Credit

Offered As Demand Warrants

Introduces students to door and window installation. Students will learn skills and trade techniques of installation, finish casing and trim. Course will identify Rough Openings (RO) and RO sizing. Introduction to tools necessary for correctly and safely installing doors and windows.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F150      Plumbing--Level I
4 Credits

Offered As Demand Warrants

Introduction to basic plumbing techniques, math, hand and power tools, extraction of information from construction drawings and materials used in the plumbing trade. This course is divided into ten (10) modules. Each module must be successfully completed.

Prerequisites: CTT F110.

Lecture + Lab + Other: 3 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F151      Introduction to Plumbing Tools and Drawings
1 Credit

Offered As Demand Warrants

Introduction to a plumber's basic hand and power tools, their care and maintenance, and safety procedures. Includes the basics of reading plumbing blueprints and drawings and specific plumbing drawings such as isometric and oblique pictorial drawings, orthographic drawings and schematic drawings.

Prerequisites: CTT F110.

Lecture + Lab + Other: 1 + 0.5 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F153      Plumbing Piping and Tools
2 Credits

Offered As Demand Warrants

Introduction to basic hand and power tools and various types of piping used in the plumbing industry. Methods of joining various types of pipe and fittings commonly found in commercial and residential dwellings. Basics of reading plumbing blueprints and drawings, including specific drawings such as isometrics and oblique pictorial.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F154      Fixtures, Faucets and Venting Systems
1 Credit

Offered As Demand Warrants

Covers the various types of fixtures plumbers install, including sinks, bathtubs, water closets, garbage disposals, dishwashers and mop basins. An overview of the drain, waste and vent system from inside the building, where the liquid drains into pipes, to the sewer and waste treatment plants.

Lecture + Lab + Other: 1 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F155      Plumbing--Level II
8 Credits

Offered As Demand Warrants

Introduction to basic plumbing techniques, math, hand and power tools, extraction of information from construction drawings and materials used in the plumbing trade. This course is divided into thirteen modules. Each module must be successfully completed. Generally, each will have two components, a written exam and a hands-on competency test.

Prerequisites: CTT F150.

Lecture + Lab + Other: 4.5 + 7 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F160      Photovoltaic Systems I
5 Credits

Offered As Demand Warrants

This course is a practical introduction to electric power generation through photovoltaic cells. During this course the student will build a solar panel to understand its operation, installation and maintenance.

Prerequisites: CTT F106 and CTT F100.

Lecture + Lab + Other: 4 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F161      Photovoltaic Systems II
5 Credits

Offered As Demand Warrants

This course covers practical methods of installing photovoltaic systems in residential settings. The students will also learn basic troubleshooting techniques.

Prerequisites: CTT F160.

Lecture + Lab + Other: 4 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F170      Residential Electrical--Level I
9 Credits

Offered As Demand Warrants

Introduction to basic electrical techniques, electrical theory, and extraction of information from construction drawings, tools, and materials used in the electrical trades. Course is divided into twelve modules. Each module must be successfully completed.

Prerequisites: CTT F115.

Lecture + Lab + Other: 8 + 2 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F171      Electrical Safety and Electric Theory
2 Credits

Offered As Demand Warrants

Course covers safety as applied to handling and working with electrical systems and circuits. Includes the required OSHA-mandated lockout/tag-out procedure, basic electrical theory and circuit calculations involving the application of Ohm's and Kirchoff's laws. Students are made aware of precautions for various electrical hazards found on the job site.

Prerequisites: CTT F115.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F172      Alternating Current, Electrical Test Equipment and the NEC
2 Credits

Offered As Demand Warrants

Introduction to the principles of alternating current and the operation and applications of various types of electrical test equipment. Includes National Electrical Code.

Prerequisites: CTT F171.

Lecture + Lab + Other: 2 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F175      Residential Electrical--Level II
8 Credits

Offered As Demand Warrants

Introduction to basic electrical techniques, electrical theory and extraction of information from construction drawings, tools and materials used in the electrical trades. This course is divided into ten modules. Each module must be successfully completed.

Prerequisites: CTT F170.

Lecture + Lab + Other: 4 + 8 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F199      Student Practicum I
1-3 Credits

Provides the student the opportunity to practice and develop the skills learned in the classroom. Skills will be developed under the guidance of journeyman and/or qualified personnel on the job site. Course may be repeated twice for a total of three credits.

Prerequisites: CTT F115.

Lecture + Lab + Other: 0 + 2-6 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken unlimited times for up to 3 credits

CTT F240      Introduction to Project Development for Tribal Residential Construction
3 Credits

Offered As Demand Warrants

Course introduces the roles and responsibilities of project managers who manage and supervise the construction of housing projects in rural Alaska. Students will gain skills in developing plans and specifications for rural construction projects, ensuring building code compliance, and learn processes and materials unique to isolated locations with limited services.

Prerequisites: CIOS F150, CTT F106, Certificate in Construction Trades Technology.

Lecture + Lab + Other: 3 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F241      Introduction to Estimating, Cost Control, and Quality Control for Tribal Residential Construction
3 Credits

Offered As Demand Warrants

Course builds upon skills obtained in CTT F240 by introducing roles and responsibilities of project managers relative to project scheduling, estimating, cost control and quality control. Students will learn to use project scheduling and cost control tools to address complicating factors such as material availability, transportation, logistics and workforce capacity.

Prerequisites: CTT F240, Certificate in Construction Trades Technology.

Lecture + Lab + Other: 3 + 0 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F250      Current Topics in Construction Trades
1-3 Credits

Offered As Demand Warrants

Various topics of current interest in the Construction Trades. Topics announced prior to each semester. Course may be repeated for credit.

Prerequisites: CTT F100.

Recommended: CTT F106.

Lecture + Lab + Other: 1-3 + 0.5-1.5 + 0

Grading System: Letter Grades with option of Plus/Minus

Repeatable for Credit: May be taken 4 times for up to 8 credits

CTT F299      Student Practicum II
1.5 Credits

Offered As Demand Warrants

Provides the student the opportunity to practice and develop the skills learned in the classroom. Skills will be developed under the guidance of journeyman and/or qualified personnel on the job site.

Prerequisites: CTT F155.

Lecture + Lab + Other: 0 + 3 + 0

Grading System: Letter Grades with option of Plus/Minus

CTT F299P      Student Practicum II
1.5 Credits

Offered As Demand Warrants

Provides the student the opportunity to practice and develop the skills learned in the classroom. Skills will be developed under the guidance of journeyman and/or qualified personnel on the job site.

Prerequisites: CTT F155.

Lecture + Lab + Other: 0 + 3 + 0

Grading System: Pass/Fail Grades